The E1 Series chassis is a high performance
design in a low cost 2U rackmount enclosure.
Feature rich, the E1 Series is a solid,
robust design which will meet the most
rigorous and demanding requirements.
This chassis is ideal for high density
I/O intensive applications.
The enclosure
is constructed of 18 gauge steel, clear
zinc plated for corrosion protection
and an attractive appearance. The front
panel is attractively detailed and is
of heavier gauge than the chassis.
There is a huge
amount of drive storage. The E1 provides
for four 3.5 inch hard drives mounted
internally. In addition, an externally
accsssible 5.25 inch and 3.5 inch drive
may be installed. The drive cage and
filler provide for several configurations.
The chassis is
cooled by three high velocity 80mm 42CFM
ball bearing fans which draw through
a front accessible filter and provide
positive air pressure to the chassis.
A door covers and
protects the drives. Accessible behind
the door is the power and reset switches
as well as the power-on and drive activity
LED's. The LED's are visible through
the door when it is closed. A USB connector
is provided at the front panel.
The E1 Chassis
provides for mounting a standard ATX
motherboard up to 9.6 x 12-inches. Three
plug-in cards up to 10.2 inches long
can be installed using the included
riser card. Additionally, several riser
card options are available.
One 5-1/4 inch drive - front accessible
One 3-1/2 inch drive - front accessible
Four 3-1/2 inch drives -internal
Front Panel Controls
Power
switch - Black momentary pushbutton with 2
position .100 header for board connection
Reset switch - Black momentary pushbutton
with 2 position .100 header for board connection
Power LED - green with 3 position .100 header
for board connection
Drive Activity - Red with 2 position .100
header for board connection
Dual USB ports
Switch
and LED connectors are labeled at the connector
end
Rear Panel Details
3 Plug-in card slots
ATX I/O Shield
Cooling
Three
80mm 42CFM fans with tach signal
Positive chassis pressure
Power Supply
Rear Mount
2U style
AC Supply - Zippy P2U or P2G form factor
DC Supply - D2U form factor, 48VDC only available
Power supply not included.
Motherboard Mounting
Standard 9.6 x 12 inch ATX motherboard
Motherboard adapter plate accommodates any
motherboard
Plug-in I/O Cards
Accommodates
three plug-in I/O cards
Cards limited to 10.2 inches long
Includes 3-slot 32-bit standard 5V PCI riser
card
Chassis Plans is more than a chassis
supplier. We offer a complete product
line including the latest motherboards,
drives, video boards and plug-in cards
including analog/digital I/O cards.
Integrating today's complex systems
can be a challenge. Allow us to provide
you with a professionally integrated
system with the OS loaded and the system
tested and burned-in as a complete unit.
We stand behind our work 100%.
