The F2 Series chassis is a high performance
design in a low cost 1U rackmount enclosure.
Feature rich, the F2 Series is a solid,
robust design which will meet the most
rigorous and demanding requirements.
This chassis is ideal for high density
server applications including collocation.
The enclosure
is constructed of 18 gauge steel, clear
zinc plated for corrosion protection
and an attractive appearance. The front
panel is attractively detailed and is
of heavier gauge than the chassis.
There is more than
ample drive storage. One slim CD and
one slim floppy drive can be installed.
In addition, three hot-swap SCSI SCA-2
drives can be installed.
A door covers and
protects the drives. Accessible behind
the door is the power and reset switches
as well as the power-on and drive activity
LED's. The LED's are visible through
the door when it is closed.
The chassis is
particularly well cooled for a 1U. Cooling
is provided by six 40mm 7CFM ball bearing
fans in addition to three 40mm 8.6FCM
exhaust fans. The six fan group is mounted
mid-chassis. Airflow is in over the
drives and out the rear of the chassis.
The F2 Chassis
provides for mounting a standard EATX
motherboard up to 12 x 13-inches. One
plug-in card can be installed using
the included 32-bit riser card.
19" (wide)
x 1U (1.7") (high) x 25.6(deep)
Weight - 35 lbs / 16 kgs
Drive Capacity
One slim CD drive - front accessible
One slim floppy drive - front accessible
Three hot swap SCSI SCA-2 drives - front
accessible
Front Panel Controls
Power
switch - Black momentary pushbutton with 2
position .100 header for board connection
Reset switch - Black momentary pushbutton
with 2 position .100 header for board connection
Power LED - green with 3 position .100 header
for board connection
Drive Activity - Red with 2 position .100
header for board connection
Switch
and LED connectors are labeled at the connector
end.
Rear Panel Details
1 Plug-in card slot
ATX I/O Shield
Cooling
Six 40mm
7CFM cooling fans
Three 40mm 8.6CFM exhaust fans
Power Supply
Not included.
AC Input - Zippy P1G form factor.
Optional 12, 24 or 48VDC supplies available
Motherboard Mounting
Standard 12 x 13 inch EATX motherboard
Motherboard adapter plate accommodates any
motherboard
Plug-in I/O Cards
Accommodates
one plug-in I/O card
Includes 32-bit standard 5V PCI riser card
Chassis Plans is more than a chassis
supplier. We offer a complete product
line including the latest motherboards,
drives, video boards and plug-in cards
including analog/digital I/O cards.
Integrating today's complex systems
can be a challenge. Allow us to provide
you with a professionally integrated
system with the OS loaded and the system
tested and burned-in as a complete unit.
We stand behind our work 100%.
